Jinggukang Far Infrared Sticker

Description:

[Scope of application] It is suitable for the adjuvant treatment of anti-inflammatory, swelling, pain relieving, promoting blood circulation and removing stasis.

Action and Indication:

It is used to relieve muscle pain,joint pain, neck and shoulder pain,backache,lumbago, traumatic injuries, etc.

Usage and Dosage:

For external use, apply after cleaning the affected area. Tear the packaging bag, take out the patch, peel off the anti-adhesive layer, aim the patch at the painful or painful part, and gently press the entire patch to apply it to the skin.
Each sticker can last for 12 hours. It can also be applied after being cut appropriately according to the size of the site to be used.

Produce info:

【Main performance】

1 Far-infrared ceramic powder content ≥ 2mg/cm2.

2 The far-infrared emission wavelength range of the product is 5-22um.

3 The normal infrared emissivity of the product should not be less than 0.75.

[Structure] The product is composed of a substrate layer, a main layer containing far-infrared ceramic powder, and a surface covering layer material.

[Scope of application] It is suitable for adjuvant treatment of anti-inflammation, detumescence, pain relief, promoting blood circulation, and removing blood stasis.

[Usage] For external use, apply after cleaning the affected area. Tear open the packaging bag, take out the patch, peel off the anti-adhesive layer, and align the patch on the injured or painful area, Gently press the entire patch onto the skin.

Each patch lasts for 12 hours. It can also be appropriately cut according to the site size to be used and then applied.

[Dosage] Use once a day on the affected area

[Precautions] This product is not a substitute for drugs; skin abnormalities, wounds, eczema, dermatitis, and eyes cannot be used; skin allergies during use, If redness, rash, blisters, itching, etc. appear on the skin, stop using it and consult a physician; infants and children must use it under the supervision of an adult and avoid Avoid eating by mistake.

[Contraindications] People with skin allergies are forbidden. [Storage Conditions] After packaging, the product should be stored in a non-polluting, dry, and ventilated environment, with relative humidity not greater than 85%, and a storage temperature of -10°C~40°C.

[Disposal method] Dispose of as general domestic waste after use.

[Validity] 3 years

Possesses the exclusive second-class equipment plaster product in China: Jingukang far-infrared paste

Jingukang Far Infrared Paste National Medical Insurance Code: C1304012530000305451

Code verification

Multi-authority security certification for our plasters

Learn more

After multiple tests by the China Institute of Testing Technology and Chongqing Medical Device Quality Inspection Center, the product is safe and effective. In the past 10 years, all random inspections by the drug supervision department have passed, and the quality is stable and reliable

Advanced Product Information

The product is composed of a base material layer, a main body layer containing far-infrared ceramic powder, and a surface covering layer material. The medium packaging is divided into two types: iron tin and stainless steel basin. It belongs to the first generation product, ordinary white cloth, each bag is double-sided and four stickers. It is the main product in the Southeast Asian market. It has many years of market foundation, low price and high market acceptance.




  • Effective penetration

  • Relieve pain

  • Sealed penetration

  • Health care

  • Easy to tear off



    Muscle strain and pain caused by work Long lasting analgesia, not easy to evaporate
    The polymer absorbs sweat from the skin, reduces skin discomfort, and is not easy to cause allergies.

A paste that breaks through the traditional process, has a stable molecular structure, and has a larger unit of active ingredients

Applicable parts:

[Precautions] This product cannot be used as a substitute for medicines; skin abnormalities, wounds, eczema, dermatitis, and eyes cannot be used; skin allergies during use, such as redness, rash, blisters, itching, etc., should be discontinued and consult a physician ; Infants and children must be used under adult supervision to avoid accidental ingestion.

FAQ

1Does Chinese plaster have healing effects?
Chinese plaster is believed to help with healing by promoting blood flow and circulation to the affected area, reducing inflammation and pain, and providing local analgesic and anti-inflammatory effects.
However, it's important to note that the scientific evidence supporting the use of Chinese plasters is limited, and more research is needed to fully understand their effectiveness in promoting healing.
In some cases, Chinese plaster may be used in conjunction with other therapies, such as acupuncture or herbal medicine, to help facilitate the body's natural healing process.
However, it's important to consult with a qualified healthcare provider before using Chinese plaster or any other alternative therapies to ensure that they are safe and appropriate for your specific condition.
2What symptoms or pain is the Chinese plaster effective for?
Chinese plaster is often used to help alleviate muscle pain and soreness. The plaster is usually applied to the affected area and left in place for several hours or overnight.
The heat generated by the plaster can help to increase blood flow and circulation to the area, which can help to reduce inflammation and ease muscle tension.
Many Chinese plasters also contain natural ingredients such as menthol, camphor, and eucalyptus oil, which have analgesic and anti-inflammatory properties and can provide additional relief from muscle pain.
While Chinese plaster may be helpful for relieving muscle pain, it's important to consult with a qualified healthcare provider before using it or any other alternative therapies to ensure that they are safe and appropriate for your specific condition.
If you have severe or persistent muscle pain, it's also important to seek medical attention to rule out any underlying conditions that may require treatment.
3Can plasters be used on open wounds?
Chinese plasters are not typically used to help heal wounds. In fact, applying Chinese plaster to an open wound or a wound that is not fully healed can be harmful and increase the risk of infection.
Chinese plasters are generally used to help alleviate pain, inflammation, and muscle soreness, and are often applied to intact skin. While some Chinese plasters may contain natural ingredients that have antiseptic or antibacterial properties, they are not intended to be used as a primary treatment for wounds.
If you have a wound that is not healing properly, it's important to seek medical attention from a qualified healthcare provider.
Your healthcare provider can recommend appropriate treatments and therapies based on the type and severity of the wound.
4How to use the plaster correctly
Here are some general steps on how to use pain relief Chinese plaster:
1. Clean the affected area: Wash the affected area with soap and water to remove any dirt or oils that could interfere with the plaster's adhesive.
2. Dry the skin: Use a clean towel to dry the skin thoroughly. The skin must be completely dry before applying the plaster.
3. Apply the plaster: Cut the plaster to the appropriate size for the affected area and peel off the protective backing. Place the adhesive side of the plaster onto the skin, making sure it adheres well to the skin.
4. Leave the plaster in place: Leave the plaster in place for several hours or overnight. It's important to follow the manufacturer's instructions for the specific type of plaster you are using.
5. Remove the plaster: Carefully remove the plaster from the skin. If the plaster is difficult to remove, you can try moistening it with warm water or oil to help loosen the adhesive.
It's important to consult with a qualified healthcare provider before using pain relief Chinese plaster or any other alternative therapies to ensure that they are safe and appropriate for your specific condition. Also, make sure to carefully read and follow the instructions provided by the manufacturer of the specific type of plaster you are using.
5The effect of plaster on arthritis
Chinese plaster may be helpful for alleviating the symptoms of arthritis, such as joint pain and stiffness.
The heat generated by the plaster can help to increase blood flow and circulation to the affected joint, which can help to reduce inflammation and ease joint pain.
Many Chinese plasters also contain natural ingredients such as menthol, camphor, and eucalyptus oil, which have analgesic and anti-inflammatory properties and can provide additional relief from arthritis symptoms.
To use Chinese plaster for arthritis, you can apply the plaster to the affected joint and leave it in place for several hours or overnight, as directed by the manufacturer.
It's important to consult with a qualified healthcare provider before using Chinese plaster or any other alternative therapies to ensure that they are safe and appropriate for your specific condition.
While Chinese plaster may provide temporary relief from arthritis symptoms, it's important to seek medical attention from a qualified healthcare provider for long-term management of arthritis.
Your healthcare provider can recommend appropriate treatments and therapies based on the type and severity of arthritis you have.
6The effect of plaster on back pain
There are many different types of plasters that can be used to help alleviate back pain. Some of the most commonly used plasters for back pain include:
1. Capsicum plaster: This type of plaster contains capsaicin, a natural compound found in chili peppers that has analgesic and anti-inflammatory properties. Capsicum plaster can help to alleviate back pain by increasing blood flow to the affected area and reducing inflammation.
2. Methyl salicylate plaster: This type of plaster contains methyl salicylate, a compound that is similar to aspirin and has analgesic and anti-inflammatory properties. Methyl salicylate plaster can help to relieve back pain by reducing inflammation and blocking pain signals.
3. Menthol plaster: This type of plaster contains menthol, a natural compound that has a cooling and analgesic effect. Menthol plaster can help to alleviate back pain by reducing muscle tension and providing a cooling sensation that can help to numb the area.
4. Traditional Chinese herbal plasters: These plasters contain a variety of natural herbs that are used in traditional Chinese medicine to help alleviate pain and inflammation. Some of the herbs commonly used in these plasters include angelica, frankincense, myrrh, and ginger.
It's important to consult with a qualified healthcare provider before using any type of plaster or alternative therapy to ensure that it is safe and appropriate for your specific condition. Additionally, it's important to use the plaster as directed by the manufacturer and to avoid using it on broken or irritated skin.
7How to Remove Plaster
To remove pain relief plaster, follow these steps:
1. Find a comfortable and convenient location: Find a comfortable and convenient location where you can remove the plaster safely and easily.
2. Loosen the edges of the plaster: Gently loosen the edges of the plaster to create a small gap between the plaster and the skin. You can use your fingers or a small tool, such as a pair of tweezers, to help lift the edges of the plaster.
3. Peel off the plaster: Slowly and gently peel off the plaster, pulling it back over itself rather than pulling it away from the skin. Try to avoid pulling the plaster too quickly or forcefully, as this can cause discomfort or skin irritation.
4. Clean the skin: After removing the plaster, clean the skin with soap and water to remove any adhesive residue or remaining particles.
5. Apply lotion or oil: You can apply a gentle lotion or oil to the skin to help soothe any irritation or redness.
If you experience any discomfort or skin irritation while removing the plaster, stop immediately and consult with a qualified healthcare provider. It's also important to carefully read and follow the instructions provided by the manufacturer of the specific type of plaster you are using.